4
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the BGP VPNv4 routes injected into the VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 network
BGP Local Router ID is 1.1.1.1.
Local AS Number is 100.
Network Mask Route-policy Short-cut
10.0.0.0 255.0.0.0
Table 2 Command output
Field Description
BGP Local Router ID Router ID of the local BGP router
Local AS Number Local AS number
Network Advertised network route
Mask Mask of the advertised network route
Route-policy Routing policy configured
Short-cut Whether this route is a short-cut route
display bgp vpnv4 vpn-instance paths
Description
Use the display bgp vpnv4 vpn-instance paths command to display the BGP VPNv4 AS path information.
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name paths [ as-regular-expression | { | { begin | exclude
| include } regular-expression } ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance
name of a VPN, which is a case-sensitive string of 1 to 31 characters.
as-regular-expression: Specifies the regular expression for filtering the AS path information to be
displayed.
To Next Page
Loading...
Need help?
General
