HP 5800 Series User Manual

301
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode : Ordered Label Retention Mode : Liberal
Table 130 Command output
Field Description
Protocol Version Version of the LDP protocol.
Neighbor Liveness Neighbor liveness timer of LDP GR.
Graceful Restart Whether GR is enabled for LDP.
FT Reconnect Timer FT reconnect timer of LDP GR.
MTU Signaling
Whether MTU signaling is supported. The switch does
not support MTU signaling.
Recovery Timer Recover timer of LDP GR.
VPN-Instance Name of the LDP-enabled VPN instance.
Loop Detection Whether loop detection is enabled.
DU Re-advertise Timer Label re-advertisement timer for DU mode.
DU Re-advertise Flag Whether label re-advertisement is enabled for DU mode.
DU Explicit Request
Whether explicit request transmission is enabled for DU
mode.
Request Retry Flag Whether request retransmission is enabled.
Label Distribution Mode
Label distribution control mode of the instance, Ordered
or Independent.
Label Retention Mode
Label retention mode of the instance. The switch supports
only the Liberal mode.
display ospf sham-link
Description
Use the display ospf sham-link command to display information about sham links.
With neither process ID nor area ID specified, the command displays information about all configured
sham links.
Related commands: sham-link.
Syntax
display ospf [ process-id ] sham-link [ area area-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the OSPF process ID, ranging from 1 to 65,535.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English