HP 5800 Series User Manual

166
mpls rsvp-te resvconfirm
Description
Use the mpls rsvp-te resvconfirm command to enable reservation confirmation on current node.
Use the undo mpls rsvp-te resvconfirm command to disable reservation confirmation.
By default, resource reservation confirmation is disabled.
After the mpls rsvp-te resvconfirm command is configured, resource reservation requests are confirmed.
Syntax
mpls rsvp-te resvconfirm
undo mpls rsvp-te resvconfirm
View
MPLS view
Default level
2: System level
Parameters
None
Examples
# Enable reservation confirmation on your device.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te resvconfirm
mpls rsvp-te srefresh
Description
Use the mpls rsvp-te srefresh command to enable summary refresh.
Use the undo mpls rsvp-te srefresh command to restore the default.
By default, summary refresh is disabled.
Srefresh messages refresh path state and reservation state. Enabling summary refresh disables
conventional time-driven state refresh.
Syntax
mpls rsvp-te srefresh
undo mpls rsvp-te srefresh
View
Interface view
Default level
2: System level
Parameters
None

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English