HP 5800 Series User Manual

205
dynamic: Specifies the dynamic MAC forwarding entries.
static: Specifies the static MAC forwarding entries.
count: Specifies the number of MAC forwarding entries.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the MAC address table.
<Sysname> display mac-address vsi
MAC ADDR STATE VSI ID PEER IP AGING TIME
0000-0000-000a dynamic 1 Vlan 300 AGING
0000-0000-0009 dynamic 1 LinkId 1 AGING
--- 2 mac address(es) found ---
# Display the total number of entries in the MAC address table.
<Sysname> display mac-address vsi count
2 mac address(es) found
Table 79 Command output
Field Description
MAC ADDR MAC address.
STATE Status of the MAC address.
MACTYPE MAC address type of the VPLS instance.
Vsilndex VSI index.
LINK ID Link ID.
VSI ID ID of the VPLS instance.
PEER IP
IP address of the peer in the VPLS instance. For a
device on the private network side, it is the ID of the
VLAN to which the device belongs. For a device on
the public network side, it is the PW ID.
AGING TIME
Whether the MAC address of the VPLS instance may
get aged, AGING or NOAGING.
XX mac address(es) found
Total number of MAC addresses in the MAC
address table of the VPLS instance.
display mpls l2vpn fib ac vpls
Description
Use the display mpls l2vpn fib ac vpls command to display the VPLS AC information.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English