277
Field Description
remote AS number Number of the remote AS.
Type Type of the BGP peer group.
Maximum allowed prefix number
Maximum number of routes that the VPN instance
supports.
Threshold Threshold value.
Configured hold timer value Setting of the hold timer.
Keepalive timer value Keepalive interval.
Optional capabilities
Optional extended capabilities enabled for the peer
group.
ORF advertise capability ORF capability supported by the peer group.
Local
Indicates whether the local device supports sending
and receiving Route-refresh packets with ORF
information. The value can be:
• both: Supports sending and receiving Route-
refresh messages with ORF information.
• Send: Supports sending Route-refresh messages
with ORF information.
• Receive: Supports receiving Route-refresh
messages with ORF information.
Peer Preferred Value Preference value configured for routes from the peer.
No routing policy is configured
Whether the VPN instance is configured with a
routing policy.
Peer IP address of the peer.
AS AS number of the peer group.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration of the BGP session in the current state.
State Status of the peer.
display bgp vpnv4 network
Description
Use the display bgp vpnv4 network command to display information about BGP VPNv4 routes injected
into a specific VPN instance or all VPN instances.
Syntax
display bgp vpnv4 { all | vpn-instance vpn-instance-name } network [ | { begin | exclude | include }
regular-expression ]
To Next Page
Loading...
Need help?
General
