HP 5800 Series User Manual

134
Table 55 Command output
Field Description
Interface Ethernet1/1 RSVP-TE enabled interface
Tunnel Dest Tunnel destination, in the format of X.X.X.X
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X
Token Bucket rate Token bucket rate, a traffic parameter
Token Bucket Size Token bucket size, a traffic parameter
display mpls rsvp-te rsb-content
Description
Use the display mpls rsvp-te rsb-content command to display information about RSVP-TE RSBs.
Syntax
display mpls rsvp-te rsb-content ingress-lsr-id Ispid tunnel-id egress-lsr-id nexthop-address [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ingress-lsr-id: Specifies the ingress LSR ID.
lspid: Specifies the local LSP ID, ranging from 1 to 65,535.
tunnel-id: Specifies the tunnel ID, ranging from 0 to 65,535.
egress-lsr-id: Specifies the egress LSR ID.
nexthop-address: Next hop address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display information about RSVP-TE RSBs.
<Sysname> display mpls rsvp-te rsb-content 19.19.19.19 1 0 29.29.29.29 101.101.101.2
The RSB Content:
Tunnel Dest: 29.29.29.29 Session Tunnel ID: 0
Tunnel ExtID: 19.19.19.19
Next Hop: 101.101.101.2 Reservation Style: SE Style

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English