HP 5800 Series User Manual

58
Field Description
DU Re-advertise Flag
Whether label re-advertisement is enabled for DU
mode.
DU Explicit Request
Whether explicit request transmission is enabled for
DU mode.
Request Retry Flag Whether request retransmission is enabled.
Label Distribution Mode
Label distribution control mode of the instance,
which can be:
• Ordered
• Independent
Label Retention Mode
Label retention mode used by the instance, which
can only be Liberal.
display mpls ldp cr-lsp
Description
Use the display mpls ldp cr-lsp command to display information about CR-LSPs established by CR-LDP.
Related commands: display mpls lsp.
Syntax
display mpls ldp cr-lsp [ lspid lsr-id lsp-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
lspid lsr-id lsp-id: Displays information about the specified CR-LSP. lsr-id is the LSR ID of the ingress, in the
form of IP address. lsp-id is the local LSP ID of the ingress, ranging from 0 to 65,535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80
characters.
Examples
# Display information about CR-LSPs established by CR-LDP.
<Sysname> display mpls ldp cr-lsp
Displaying All LDP CR-LSP(s) for public network
----------------------------------------------------------------
CR-LSP ID DestAddress/Mask In/OutLabel In/Out-Interface
----------------------------------------------------------------

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English