HP 5800 Series User Manual

154
Field Description
Opaque Type 1 for TE, carried in the header of Opaque LSA
Opaque ID Opaque ID, carried in the header of Opaque LSA
Advertising Router ID Router ID of the node where the LSA was generated
LSA age LSA age, carried in the header of Opaque LSA
Length LSA length, carried in the header of Opaque LSA
LSA Options LSA options, carried in the header of Opaque LSA
LS Seq Number LSA sequence number, carried in the header of Opaque LSA
Checksum LSA checksum, carried in the header of Opaque LSA
Link Type Link type: point to point, point to multipoint, or multiAccess
Admin Group Administrative group attribute
display ospf traffic-adjustment
Description
Use the display ospf traffic-adjustment command to display the settings of tunnel traffic adjustment (IGP
shortcut and forwarding adjacency) for a specific OSPF process or all OSPF processes.
Syntax
display ospf [ process-id ] traffic-adjustment [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the OSPF process ID, ranging from 1 to 65,535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the settings of tunnel traffic adjustment for all OSPF processes.
<Sysname> display ospf traffic-adjustment
OSPF Process 100 with Router ID 100.0.0.1
Traffic adjustment
Interface: 100.0.0.1 (Tunnel0)
Type: Forwarding Adjacency State: Up
Neighbor ID: 100.0.0.2 Cost: 100

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English