136
Field Description
Token Bucket size Token bucket size, a traffic parameter.
Peak Data Rate Peak data rate (in kbps), a traffic parameter.
Maximum packet size Maximum packet size, a traffic parameter.
Minimum policed unit Minimum policed unit, a traffic parameter.
Bandwidth guarantees Guaranteed bandwidth, a reservation specifications parameter.
Delay guarantees Delay guarantee, a reservation specifications parameter.
QOS service QoS guarantee/control.
Resv Message Reservation message received on a particular interface from next hop (X.X.X.X).
Graceful Restart State State of GR: stale or normal. Displayed as --- when not supported by the device.
display mpls rsvp-te sender
Description
Use the display mpls rsvp-te sender command to display RSVP-TE sender message information.
Syntax
display mpls rsvp-te sender [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display the RSVP-TE sender message information on interface VLAN-interface 3.
<Sysname> display mpls rsvp-te sender interface vlan-interface 3
Interface Vlan-interface3;
Tunnel Dest: 29.29.29.29 Ingress LSR ID: 19.19.19.19
LSP ID: 1 Session Tunnel ID: 1
Session Name: Tunnel0
Previous Hop Address: 101.101.101.1
Token bucket rate: 0.0 Token bucket size: 0.00
To Next Page
Loading...
Need help?
General
