HP 5800 Series User Manual

67
Field Description
Transport Address
Local LDP transport address used to establish a TCP
connection with this remote peer.
Hello Message Sent/Rcvd
Counts of hello messages sent to/received from this remote
peer.
display mpls ldp session
Description
Use the display mpls ldp session command to display information about LDP sessions.
If you do not specify any parameter, the command displays information about all public network LDP
sessions.
Related commands: mpls ldp (interface view) and mpls ldp (system view).
Syntax
display mpls ldp session [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ peer-id | verbose ] ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all information.
verbose: Displays detailed information.
vpn-instance vpn-instance-name: Displays information about all LDP sessions of a VPN instance. vpn-
instance-name indicates the name of the VPN instance, which is a case-sensitive string of 1 to 31
characters.
peer-id: Displays the LDP session information of a peer. peer-id indicates the LSR ID of the peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80
characters.
Examples
# Display information about all public network LDP sessions.
<Sysname> display mpls ldp session
LDP Session(s) in Public Network
Total number of sessions: 1
--------------------------------------------------------------------------

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English