HP 5800 Series User Manual

300
Field Description
Threshold Value(%)
Maximum ratio of the actual route number to the maximum route
number in percentage. When the ratio is reached, the device
rejects new routes.
Interfaces Interface to which the VPN instance is bound.
display mpls ldp vpn-instance
Description
Use the display mpls ldp vpn-instance command to display information about an LDP instance.
Related commands: mpls ldp vpn-instance.
Syntax
display mpls ldp vpn-instance vpn-instance-name [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: M o n i t o r v i ew
Parameters
vpn-instance-name: Specifies the name of the VPN instance, which is a case-sensitive string of 1 to 31
characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display information about the LDP instance named vpn1.
<Sysname> display mpls ldp vpn-instance vpn1
LDP Global Information
--------------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : Off Recovery Timer : 60 Sec
LDP Instance Information
--------------------------------------------------------------------
Instance ID : 1 VPN-Instance : vpn1
Instance Status : Active LSR ID : 1.1.1.9
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English