121
------------------------
0000.0000.0001.00-->0000.0000.0001.01 Type: MULACC LinkID: 10.1.1.1
0000.0000.0002.00-->0000.0000.0003.00 Type: P2P LinkID: 3.3.3.9
0000.0000.0002.00-->0000.0000.0001.01 Type: MULACC LinkID: 10.1.1.1
0000.0000.0003.00-->0000.0000.0002.00 Type: P2P LinkID: 2.2.2.9
0000.0000.0003.00-->0000.0000.0004.01 Type: MULACC LinkID: 30.1.1.2
0000.0000.0004.00-->0000.0000.0004.01 Type: MULACC LinkID: 30.1.1.2
Total Number of TE Links in Level-2 Area: 6, Num Active: 6
Table 45 Command output
Field Description
Type Type of the link
LinkID ID of the link
Total Number of TE Links in Level-2 Area Total number of TE links in the Level-2 area
Num Active Number of active TE links
display isis traffic-eng network
Description
Use the display isis traffic-eng network command to display information about TE networks for IS-IS.
If you do not specify an IS-IS level, the TE network information in the IS-IS Level-1-2 area is displayed.
Syntax
display isis traffic-eng network [ level-1 | level-1-2 | level-2 ] [ process-id | vpn-instance vpn-instance-
name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
level-1: Displays the TE information of IS-IS Level-1 routers.
level-1-2: Displays the TE information of IS-IS Level-1-2 routers.
level-2: Displays the TE information of IS-IS Level-2 routers.
process-id: Specifies the IS-IS process ID, ranging from 1 to 65,535.
vpn-instance vpn-instance-name: Displays the IS-IS TE network information of the specified VPN. The vpn-
instance-name parameter specifies an MPLS L3VPN by its instance name, which is a case-sensitive string
of 1 to 31 characters. To display the IS-IS TE network information of the public network, do not specify
this keyword and parameter combination.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
To Next Page
Loading...
Need help?
General
