HP 5800 Series User Manual

209
# Display the detailed VPLS PW information.
<Sysname> display mpls l2vpn fib pw vpls verbose
Total VSI Entry:1 Total PW Entry:1
VSI Name : vsi1 VSI Index: 0
**Link ID : 1
In Interface : GigabitEthernet1/0/1
In VC Label : 1000
Out VC Label : 1002
Encapsulation Type : Ethernet
MTU : 1500
Role : Main
State : Active
Dual Link ID : 2
Tunnel ID : 0x878ad000(Done)
GrCount:1
Tunnel ID : 0x878ad001(Waiting)
GrCount:1
Table 83 Command output
Field Description
Total VSI Entry
Total number of VSI entries, which is displayed only when
you display all VPLS PW entries
Total PW Entry
Total number of VPLS PW entries, which is displayed only
when you display all VPLS PW entries
VSI Name VPLS instance name
VSI Index VPLS instance index
Link ID Link ID of a PW in the VPLS instance
In Interface Incoming interface—the interface bound to an L2VPN
In VC Label Incoming VC label
Out VC Label Outgoing VC label
MTU Maximum transmission unit
Role PW role, which can be Main, Backup, or Normal
State PW state, active or standby
Dual Link ID
Link ID of the other PW, which is displayed when main
and backup PWs exist in the VPLS instance
Tunnel ID
Public tunnel ID and entry state (Done or Waiting)
GrCount: Number of times that GR occurs
display pw-class
Description
Use the display pw-class command to display information about one or all PW class templates.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English