HP 5800 Series User Manual

303
Field Description
State Status of the sham link neighbor
Area Destination IP address of the sham link
Cost Cost of the sham link
State Status of the sham link
Type Type of the sham link
Timers Timers of the sham link
display tunnel-policy
Description
Use the display tunnel-policy command to display information about a tunneling policy or all tunneling
policies.
Related commands: tunnel-policy and tunnel select-seq.
Syntax
display tunnel-policy { all | policy-name tunnel-policy-name } [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all tunneling policies.
tunnel-policy-name: Specifies the name of a tunneling policy, which is a string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all tunneling policies.
<Sysname> display tunnel-policy all
Tunnel Policy Name Select-Seq Load balance No
------------------------------------------------------
t LSP 1
aaa LSP CR-LSP 1
bbb LSP 1
# Display tunneling policy aaa.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English