HP 5800 Series User Manual

128
Table 51 Command output
Field Description
Interface RSVP-TE enabled interface
Token Bucket rate Token bucket rate, a traffic parameter
Peak Data Rate Peak rate, a traffic parameter
Tunnel Dest Tunnel destination, in the format of X.X.X.X
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X
Next Hop Addr Next hop address, in the format of X.X.X.X
display mpls rsvp-te peer
Description
Use the display mpls rsvp-te peer command to display information about RSVP-TE neighbors on the
specified or all interfaces.
Syntax
display mpls rsvp-te peer [ interface interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display information about RSVP-TE neighbors on all interfaces.
<Sysname> display mpls rsvp-te peer
Interface Vlan-interface3
Neighbor Addr: 80.4.1.1
SrcInstance: 841 NbrSrcInstance: 928
PSB Count: 0 RSB Count: 1
Hello Type Sent: ACK Neighbor Hello Extension: ENABLE
SRefresh Enable: NO Reliability Enable: YES
Graceful Restart State: Ready
Restart Time: 200 sec Recovery Time: 150 sec

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English