144
<Sysname> display mpls te cspf tedb node
MPLS LSR-Id: 1.1.1.1
IGP Type: OSPF Process Id: 100
MPLS-TE Link Count: 1
Link[1] :
Interface IP Address: 2.0.0.33, 2.0.0.35, 2.0.0.36,
Neighbor IP Address: 2.0.0.2, 2.0.0.42, 2.0.0.43,
2.0.0.44, 2.0.0.45, 2.0.0.46,
2.0.0.47, 2.0.0.32,
Neighbor MPLS LSR-Id : 1.1.1.2
IGP Area: 1
Link Type: point-to-point Link Status: Inactive
IGP Metric: 100 TE Metric: 100 Color: 0xff
MPLS LSR-Id: 1.1.1.1
IGP Type: ISIS Process Id: 100
MPLS-TE Link Count: 2
Link[1] :
Interface IP Address: 2.0.0.33, 2.0.0.35, 2.0.0.36,
Neighbor IP Address: 2.0.0.2, 2.0.0.42, 2.0.0.43,
2.0.0.44, 2.0.0.45, 2.0.0.46,
2.0.0.47, 2.0.0.32, 2.0.0.33
Neighbor MPLS LSR-Id: 1.1.1.2
IGP Area: Level-0
Link Type: point-to-point Link Status: Active
IGP Metric: 10 TE Metric: 10 Color: 0x11
Table 64 Command output
Field Description
MPLS LSR-Id MPLS LSR ID of node
Process Id IGP process ID
MPLS-TE Link Count Number of MPLS TE links
Link[1] Information of the first link
DR Address IP address of the DR
IGP Metric IGP metric of link
TE Metric TE metric of link
Color Link administrative attribute
display mpls te link-administration admission-control
Description
Use the display mpls te link-administration admission-control command to display information about CR-
LSPs carried either on the link of a specified interface or links of all interfaces if no interface is specified.
To Next Page
Loading...
Need help?
General
