168
Default level
2: System level
Parameters
restart-time: Specifies the RSVP-TE GR restart interval in seconds, ranging from 60 to 300.
Examples
# Set the RSVP-TE GR restart interval to 200 seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer graceful-restart restart 200
mpls rsvp-te timer hello
Description
Use the mpls rsvp-te timer hello command to configure the hello interval.
Use the undo mpls rsvp-te timer hello command to restore the default.
The default hello interval is three seconds.
Before configuring this command, enable the hello mechanism in MPLS view.
Related commands: mpls rsvp-te hello and mpls rsvp-te hello-lost.
Syntax
mpls rsvp-te timer hello timevalue
undo mpls rsvp-te timer hello
View
MPLS view
Default level
2: System level
Parameters
timevalue: Specifies the hello interval, ranging from 1 to 60 seconds.
Examples
# Set the hello interval to five seconds.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] mpls rsvp-te timer hello 5
mpls rsvp-te timer refresh
Description
Use the mpls rsvp-te timer refresh command to configure the path/reservation state refresh interval.
Use the undo mpls rsvp-te timer refresh command to restore the default.
The default path/reservation state refresh interval is 30 seconds.
Related commands: mpls rsvp-te keep-multiplier.
To Next Page
Loading...
Need help?
General
