HP 5800 Series User Manual

358
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all IPv6 FIB information of VPN instance vpn1.
<Sysname> display ipv6 fib vpn-instance vpn1
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : UH
Label : Null Token : Invalid
Interface : InLoopBack0
Table 143 Command output
Field Description
Total number of Routes Total number of matched routes in the FIB
Flag
Flag of the route. Possible values are:
• U—Usable route
• G—Gateway route
• H—Host route.
• B—Blackhole route
• D—Dynamic route
• S—Static route.
Label Label value added to a packet
Token LSP index, used to associate an NHLFE entry
Interface Outgoing interface of packets
display ipv6 fib vpn-instance ipv6-address
Description
Use the display ipv6 fib vpn-instance ipv6-address command to display a VPN’s IPv6 FIB information that
matches a destination IPv6 address.
If you do not specify the prefix length, the command displays the matched IPv6 FIB information that has
the longest prefix. If you specify the prefix length, the command displays the matched IPv6 FIB information
that has the exact prefix length.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English