HP 5800 Series User Manual

280
display bgp vpnv4 peer
Description
Use the display bgp vpnv4 peer command to display information about BGP VPNv4 peers.
Syntax
display bgp vpnv4 all peer [ ip-address verbose | verbose ] [ | { begin | exclude | include } regular-
expression ]
display bgp vpnv4 vpn-instance vpn-instance-name peer [ group-name log-info | ip-address { log-info |
verbose } | verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all VPNv4 peers.
vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the
instance name of an MPLS L3VPN, which is a case-sensitive string of 1 to 31 characters.
group-name: Specifies the name of the peer group, which is a case-sensitive string of 1 to 47 characters.
log-info: Displays log information.
ip-address: Specifies the IP address of the peer.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about BGP VPNv4 peers of VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 200 24 29 0 1 00:18:47 Established
Table 117 Command output
Field Description
BGP Local router ID Router ID of the local BGP router

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English