HP 5800 Series User Manual

3
Field Description
Configured hold timer value Setting of the hold timer.
Keepalive timer value Keepalive interval.
Minimum time between advertisement
runs
Minimum route advertisement interval.
Local
Indicates whether the local device supports sending and receiving
Route-refresh packets with ORF information. The value can be:
• Both—Supports sending and receiving Route-refresh messages
with ORF information.
• Send—Supports sending Route-refresh messages with ORF
information.
• Receive—Supports receiving Route-refresh messages with ORF
information.
Peer Preferred Value Weight for the routes from the peer.
No routing policy is configured Whether the VPN instance is configured with a routing policy.
Peer IP address of the peer.
AS AS number of the peer group.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration of the BGP session in the current state.
State Status of the peer.
display bgp vpnv4 vpn-instance network
Description
Use the display bgp vpnv4 vpn-instance network command to display information about the BGP VPNv4
routes injected into a specific VPN instance or all VPN instances.
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name network [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance
name of a VPN, which is a case-sensitive string of 1 to 31 characters.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English