141
Field Description
State Current state of the CR-LSP
# Display detailed information about all static CR-LSPs.
<Sysname> display mpls static-cr-lsp verbose
No : 1
LSP-Name : Tunnel0
LSR-Type : Ingress
FEC : 3.3.3.3/32
In-Label : NULL
Out-Label : 20
In-Interface : -
Out-Interface : Vlan-interface2
NextHop : 2.1.1.2
Lsp Status : Up
Table 60 Command output
Field Description
LSP-Name Static CR-LSP name
LSR-Type Role of the LSR in the LSP: ingress, transit, or egress
FEC FEC
In-Label Incoming label
Out-Label Outgoing label
In-Interface Incoming interface
Out-Interface Outgoing interface
NextHop Next hop address
Lsp Status Status of the LSP
display mpls te cspf tedb
Description
Use the display mpls te cspf tedb command to display information about CSPF-based TEDB by specified
criteria.
Syntax
display mpls te cspf tedb { all | area area-id | interface ip-address | network-lsa | node [ mpls-lsr-id ] }
[ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
To Next Page
Loading...
Need help?
General
