HP 5800 Series User Manual

42
Syntax
export route-policy route-policy
undo export route-policy
View
VPN instance view, IPv6 VPN view
Default level
2: System level
Parameters
route-policy: Specifies the name of an export routing policy, which is a case-sensitive string of 1 to 63
characters.
Examples
# Apply export routing policy poly-1 to VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] export route-policy poly-1
# Apply export routing policy poly-3 to the IPv6 VPN of VPN instance vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] ipv6-family
[Sysname-vpn-ipv6-vpn3] export route-policy poly-3
filter-policy export (BGP-VPNv6 subaddress family view)
Description
Use the filter-policy export command to filter all or certain types of routes to be advertised.
Use the undo filter-policy export command to remove the configuration.
By default, MP-BGP does not filter routes to be advertised.
Only routes that survive the filtering are advertised by MP-BGP.
If you do not specify routing protocol parameters for the filter-policy export command, all routes to be
advertised are filtered.
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ direct | isisv6 process-id | ospfv3
process-id | ripng process-id | static ]
undo filter-policy export [ direct | isisv6 process-id | ospfv3 process-id | ripng process-id | static ]
View
BGP-VPNv6 subaddress family view
Default level
2: System level
Parameters
acl6-number: Specifies the IPv6 ACL number, ranging from 2000 to 3999.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English