HP 5800 Series User Manual

320
• PEs in the same AS.
• The peer ASBR PE.
Syntax
peer { group-name | ip-address } label-route-capability
undo peer { group-name | ip-address } label-route-capability
View
BGP view, BGP VPN instance view
Default level
2: System level
Parameters
group-name: Specifies the name of the peer group, which is a case-sensitive string of 1 to 47 characters.
ip-address: Specifies the IP address of the peer.
Examples
# Specify to exchange labeled IPv4 routes with peer 2.2.2.2.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 2.2.2.2 label-route-capability
peer next-hop-invariable (BGP-VPNv4 subaddress family view)
Description
Use the peer next-hop-invariable command to configure the device not to change the next hop of a route
when advertising it to a peer.
Use the undo peer next-hop-invariable command to restore the default.
By default, a device uses its address as the next hop when advertising a route to its EBGP peer. In the
inter-provider option C application, you need to configure next-hop-invariable on the RR for multi-hop
EBGP neighbors and reflector clients to ensure that the next hop of a VPN route will not be changed.
Related commands: peer ebgp-max-hop (Layer 3—IP Routing Command Reference).
Syntax
peer { group-name | ip-address } next-hop-invariable
undo peer { group-name | ip-address } next-hop-invariable
View
BGP-VPNv4 subaddress family view
Default level
2: System level
Parameters
group-name: Specifies the name of the peer group, which is a case-sensitive string of 1 to 47 characters.
ip-address: Specifies the IP address of the peer.

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English