24
undo peer { group-name | ip-address } allow-as-loop
View
BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Specifies the name of the peer group, which is a string of 1 to 47 characters.
ip-address: IP address of the peer.
number: Maximum number that the local AS number can appear repeatedly in the AS-PATH attribute. It
ranges from 1 to 10, and defaults to 1.
Examples
# Allow the local AS number to appear repeatedly in the AS-PATH attribute of a route received from peer
1.1.1.1 f o r u p t o t w i c e .
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv4-family vpn-instance vpn1
[Sysname-bgp-vpn1] peer 1.1.1.1 allow-as-loop 2
peer group
Description
Use the peer group command to add a peer to a peer group.
Use the undo peer group command to remove a peer from a peer group.
Syntax
peer ip-address group group-name [ as-number as-number ]
undo peer ip-address group group-name
View
BGP-VPN instance view
Default level
2: System level
Parameters
ip-address: Specifies the IP address of a peer.
group-name: Specifies the name of a peer group, which is a string of 1 to 47 characters.
as-number as-number: Specifies an AS number, which ranges from 1 to 4,294,967,295.
Examples
# Add peer 1.1.1.1 into peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] peer 1.1.1.1 as-number 200
To Next Page
Loading...
Need help?
General
