56
to label-value2: Specifies the end label of a range of labels, ranging from 16 to 204,799.
all: Specifies all labels.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display information about labels ranging from 900 to 1500.
<Sysname> display mpls label 900 to 1500
Label alloc state: '.' means not used, '$' means used
------------------------------Static Label--------------------------------
900:........ ........ ........ ........ ........ ........ ........ ........
964:........ ........ ........ ........ ........ ........ ........ ....
------------------------------Dynamic Label-------------------------------
1024:...$.... ........ ........ ........ ........ ........ ........ ........
1088:........ ........ ........ ........ ........ ........ ........ ........
1152:........ ........ ........ ........ ........ ........ ........ ........
1216:........ ........ ........ ........ ........ ........ ........ ........
1280:........ ........ ........ ........ ........ ........ ........ ........
1344:........ ........ ........ ........ ........ ........ ........ ........
1408:........ ........ ........ ........ ........ ........ ........ ........
1472:........ ........ ........ .....
display mpls ldp
Description
Use the display mpls ldp command to display information about LDP.
If you do not specify any parameter, the command will display all information about LDP in detail.
Related commands: mpls ldp (interface view) and mpls ldp (system view).
Syntax
display mpls ldp [ all [ verbose ] ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all information about LDP .
verbose: Displays detailed information.
To Next Page
Loading...
Need help?
General
