149
Table 68 Command output
Field Description
Tunnel Interface Name Tunnel interface name
Lsp ID LSP ID
Hop 0 Hop 0 on the path
Hop 1 Hop 1 on the path
Hop 2 Hop 2 on the path
display mpls te tunnel statistics
Description
Use the display mpls te tunnel statistics command to display statistics about MPLS TE tunnels.
Syntax
display mpls te tunnel statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display statistics about MPLS TE tunnels.
<Sysname> display mpls te tunnel statistics
Ingress: 0 Tunnels, 0 Tunnels Up, 0 CRLSPs Up
0 Modified, 0 In-Progress, 0 Failed
Transit: 0 Up
Egress : 0 Up
Table 69 Command output
Field Description
Ingress This device is the tunnel ingress.
Transit This device is a transit node on the tunnel.
Egress This device is the tunnel egress.
To Next Page
Loading...
Need help?
General
