252
Field Description
No. Sequence number
vpn-name Name of the VPN
local-num Number of local connections
remote-num Number of remote connections
unknown-num Number of unknown connections
up-num Number of connections that are up
total-num Total number of connections
display mpls l2vpn fib ac vpws
Description
Use the display mpls l2vpn fib ac vpws command to display the L2VPN AC information.
Syntax
display mpls l2vpn fib ac vpws [ interface interface-type interface-number [ service-instance service-
instanceid ] ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connecting a CE by its type and number.
service-instance service-instanceid: Specifies a service instance. service-instanceid is the service instance
ID, ranging from 1 to 4094.
slot slot-number: Displays the VPWS AC information on a member device in the IRF virtual device. The
slot-number parameter is the member number of the device in the IRF virtual device. The value range for
the slot-number parameter depends on the number of members and numbering conditions in the current
IRF virtual device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the MPLS L2VPN AC information.
<Sysname> display mpls l2vpn fib ac vpws
Total AC Entry:1
To Next Page
Loading...
Need help?
General
