HP 5800 Series User Manual

346
View
BGP-VPNv6 subaddress family view
Default level
2: System level
Parameters
med-value: Specifies the default value of the MED, ranging from 0 to 4,294,967,295.
Examples
# Set the default MED to 10 in BGP-VPNv6 subaddress family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] default med 10
display bgp vpnv6 all peer
Description
Use the display bgp vpnv6 all peer command to display information about the BGP VPNv6 peer or peers
established between PEs.
If you do not specify any parameter, the command displays the brief information of all peers.
Syntax
display bgp vpnv6 all peer [ ipv4-address verbose | verbose ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: M o n i t o r
Parameters
ipv4-address: Specifies a peer by its IPv4 address.
verbose: Displays the detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the brief information of all BGP VPNv6 peers.
<Sysname> display bgp vpnv6 all peer
BGP local router ID : 192.168.1.40

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English