349
Field Description
ORF advertise capability based
on prefix (type 64):
Supports the ORF address prefix capability and the capability value is
64.
Local
Indicates whether the local device supports sending and receiving
Route-refresh packets with ORF information. The value can be:
• both—Supports sending and receiving Route-refresh messages with
ORF information.
• send—Supports sending Route-refresh messages with ORF
information.
• receive—Supports receiving Route-refresh messages with ORF
information.
Negotiated
ORF capability negotiated by the local and remote peers. The value
can be:
• send—The local peer can send Route-refresh messages with ORF
information and the remote peer can receive Route-refresh messages
with ORF information.
• receive—The local peer can receive Route-refresh messages with
ORF information and the remote peer can send Route-refresh
messages with ORF information.
This field is displayed only when the ORF capability negotiation is
successful.
Connect-interface
Indicates whether a source interface is configured for TCP connection
establishment.
Peer Preferred Value Preference value configured for the routes from the peer.
BFD Whether BFD is enabled for the peer.
display bgp vpnv6 all routing-table
Description
Use the display bgp vpnv6 all routing-table command to display all BGP VPNv6 routing information.
Syntax
display bgp vpnv6 all routing-table [ network-address prefix-length [ longer-prefixes ] | peer ip-address
{ advertised-routes | received-routes } [ statistic ] | statistic ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: M o n i t o r
Parameters
network-address: Specifies the IPv6 address of the destination network segment.
prefix-length: Specifies the length of the prefix, ranging from 0 to 128.
longer-prefixes: Displays each routing entry that meets the following conditions:
To Next Page
Loading...
Need help?
General
