l Configuration file of SwitchC
#
sysname SwitchC
#
router id 3.3.3.3
#
vlan batch 10
#
interface Vlanif10
ip address 192.168.1.3 255.255.255.0
ospf dr-priority 2
#
interface XGigabitEthernet0/0/1
port trunk allow-pass vlan 10
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
#
return
l Configuration file of SwitchD
#
sysname SwitchD
#
router id 4.4.4.4
#
vlan batch 10
#
interface Vlanif10
ip address 192.168.1.4 255.255.255.0
#
interface XGigabitEthernet0/0/1
port trunk allow-pass vlan 10
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
#
return
4.14.5 Example for Configuring OSPF Load Balancing
Networking Requirements
As shown in Figure 4-9:
l SwitchA, SwitchB, SwitchC, and SwitchD connect to each other through OSPF.
l SwitchA, SwitchB, SwitchC, and SwitchD belong to Area 0.
l Load balancing is performed between SwitchB and SwitchC. The traffic of SwitchA is sent
to SwitchD by SwitchB and SwitchC.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
156
To Next Page
Loading...
Need help?
General
