Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ripng [ process-id ]
The RIPng view is displayed.
Step 3 Run:
maximum load-balancing number
The maximum number of equal-cost routes is set.
----End
3.4.5 Checking the Configuration
After RIPng route attributes are successfully set, you can view the configuration and routing
information of RIPng.
Prerequisites
The configurations of RIPng route attributes are complete.
Procedure
l Run the display ripng [ process-id ] command to check the running status and configuration
of RIPng.
l Run the display ripng process-id database command to check all activated routes in the
RIPng database.
l Run the display ripng process-id route command to check all the RIPng routes that are
learned from other switchs.
----End
3.5 Controlling the Advertising of RIPng Routing
Information
To meet the requirements of complex networks, it is required to accurately control the advertising
of RIPng routing information.
3.5.1 Establishing the Configuration Task
RIPng routing information can be advertised through route summarization, default routes, and
imported external routes.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 3 RIPng Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66
To Next Page
Loading...
Need help?
General
