Huawei S6700 Series Configuration Guide

Interface : Pos1/0/1 Flags : D
Destination : 2002::1 PrefixLength : 128
NextHop : ::1 Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : Pos1/0/1 Flags : D
Destination : 2003:: PrefixLength : 64
NextHop : 2001::2 Preference : 255
Cost : 0 Protocol : EBGP
RelayNextHop : :: TunnelID : 0x0
Interface : Pos1/0/0 Flags : D
Destination : 2003:: PrefixLength : 64
NextHop : 2002::2 Preference : 255
Cost : 0 Protocol : EBGP
RelayNextHop : :: TunnelID : 0x0
Interface : Pos1/0/1 Flags : D
Destination : 2004:: PrefixLength : 64
NextHop : 2001::2 Preference : 255
Cost : 0 Protocol : EBGP
RelayNextHop : :: TunnelID : 0x0
Interface : Pos1/0/0 Flags : D
Destination : 2004:: PrefixLength : 64
NextHop : 2002::2 Preference : 255
Cost : 0 Protocol : EBGP
RelayNextHop : :: TunnelID : 0x0
Interface : Pos1/0/1 Flags : D
Destination : FE80:: PrefixLength : 10
NextHop : :: Preference : 0
Cost : 0 Protocol : Direct
RelayNextHop : :: TunnelID : 0x0
Interface : NULL0 Flags : D
8.10 Configuring a BGP4+ Peer Group
By configuring a BGP4+ peer group, you can simplify the management of routing policies, and
thus improve the efficiency of route advertisement.
8.10.1 Establishing the Configuration Task
Before configuring a BGP4+ peer group, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
A great number of peers exist in a large-scale BGP4+ network, which is not convenient for
configuration and maintenance. In this case, you can configure peer groups to simplify the
management and improve the efficiency of route advertisement. According to the AS where the
peers reside, you can classify peer groups into IBGP peer groups and EBGP peer groups. You
can classify EBGP peer groups into pure EBGP peer groups and mixed EBGP peer groups. This
classification is performed according to the position of the peers in the same external AS.
Pre-configuration Tasks
Before configuring a BGP4+ peer group, complete the following task:
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 8 BGP4+ Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
529

Huawei S6700 Series Specifications

General

Brand	Huawei
Model	S6700 Series
Category	Switch
Language	English