Huawei S6700 Series Configuration Guide

#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 40
#
return
l Configuration file of SwitchD
#
sysname SwitchD
#
vlan batch 30 40 60
#
isis 1
is-level level-2
network-entity 10.0000.0000.0004.00
#
interface Vlanif30
ip address 192.168.0.2 255.255.255.0
isis enable 1
#
interface Vlanif40
ip address 192.168.1.2 255.255.255.0
isis enable 1
#
interface Vlanif60
ip address 172.17.1.1 255.255.255.0
isis enable 1
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 30
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 40
#
interface XGigabitEthernet0/0/3
port link-type trunk
port trunk allow-pass vlan 60
#
return
6.18.5 Example for Configuring IS-IS GR
Networking Requirements
As shown in Figure 6-7, the networking requirements are as follows: Switch A, Switch A and
Switch C belong to the same autonomous system . They run the IS-IS protocol to implement
interworking and provide the GR mechanism.
After Switch A, Switch B, and Switch C set up IS-IS adjacencies with each other, they start to
exchange routing information. When IS-IS is restarted on Switch A, Switch A resends
connection requests to neighbors to synchronize the LSDB.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 6 IS-IS Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
338

Huawei S6700 Series Specifications

General

Brand	Huawei
Model	S6700 Series
Category	Switch
Language	English