Context
CAUTION
The IS-IS data structure cannot be restored after you reset it. All the previous structure
information and the neighbor relationship are reset. Exercise caution when running this
command.
To clear the IS-IS data structure, run the following reset command in the user view.
Procedure
Step 1 Run reset isis all [ process-id | vpn-instance vpn-instance-name ] command to reset the IS-IS
data structure.
By default, the IS-IS data structure is not reset.
----End
6.17.2 Resetting a Specific IS-IS Neighbor
By restarting IS-IS neighbors, you can reset the IS-IS neighbor relationship, and thus make the
new configuration take effect.
Context
CAUTION
The specified IS-IS neighbor relationship is deleted after you reset a specified IS-IS neighbor
by using the reset isis peer command. Exercise caution when running this command.
After the IS-IS routing policy or the protocol changes, you can reset a specific IS-IS neighbor
to validate the new configuration.
To reset a specific IS-IS neighbor, run the following reset command in the user view.
Procedure
Step 1 Run reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ] command to reset
a specific IS-IS neighbor.
----End
6.18 Configuration Examples
This section provides examples of IS-IS configuration.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 6 IS-IS Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
316
To Next Page
Loading...
Need help?
General
