Huawei S6700 Series Configuration Guide

ip address 10.1.2.2 255.255.255.0
#
interface Vlanif40
ip address 192.168.1.1 255.255.255.0
#
interface XGigabitEthernet0/0/1
port trunk allow-pass vlan 20
#
interface XGigabitEthernet0/0/2
port trunk allow-pass vlan 40
#
ospf 1 router-id 3.3.3.3
area 0.0.0.0
network 10.1.2.0 0.0.0.255
network 192.168.1.0 0.0.0.255
#
return
l Configuration file of SwitchD
#
sysname SwitchD
#
vlan batch 30 40 60
#
interface Vlanif30
ip address 192.168.0.2 255.255.255.0
#
interface Vlanif40
ip address 192.168.1.2 255.255.255.0
#
interface Vlanif60
ip address 172.17.1.1 255.255.255.0
#
interface XGigabitEthernet0/0/1
port trunk allow-pass vlan 30
#
interface XGigabitEthernet0/0/2
port trunk allow-pass vlan 40
#
interface XGigabitEthernet0/0/3
port trunk allow-pass vlan 60
#
ospf 1 router-id 4.4.4.4
area 0.0.0.0
network 192.168.0.0 0.0.0.255
network 192.168.1.0 0.0.0.255
network 172.17.1.0 0.0.0.255
#
return
4.14.6 Example for Configuring OSPF GR
Networking Requirements
As shown in Figure 4-10, Switch A and Switch B have two main control boards, which work
in active/standby mode. Switch A and Switch B belong to Area 0 and are connected through
OSPF. They also provide the GR feature.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
161

Huawei S6700 Series Specifications

General

Brand	Huawei
Model	S6700 Series
Category	Switch
Language	English