KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
17-1
[17] KE2000/2000R JIG LISTS
Part No. Part name Purpose Figure Remarks
E2101998000 Jig nozzle A Laser offset
Common for
KE2010/20/30/40
E3622721000 CAL piece A Head offset
Common for
KE2010/20/30/40 and
KE730/740/750/760
E51907290A0 CAL piece V VCS camera offset
Common for
KE2020/40
E2106998000 Camera
adjustment jig
OCC camera offset
Common for
KE2010/20/30/40 and
KE700 series
E2107998000 Ceramic board
(2 inch)
Adjustment of OCC camera
illumination
Common for
KE2010/20/30/40
40008108 ATC offset boss,
6 sets
ATC offset (assembly position)
For component height
6 mm
40008110 ATC offset boss,
12 sets
ATC offset (assembly position)
For component height
12 mm
40008112 ATC offset boss,
20 sets
ATC offset (assembly position)
For component height
20 mm
E21189980A0 ATC offset boss,
25 sets
ATC offset (assembly position)
For component height
25 mm
40016860 ATC HT boss
NM6080001SC Nut
ATC offset (assembly height)
Part No.: 40016862
Part name: ATC HT
boss set (Set part No.
of ATC HT boss and
nut)
Rev. 2.00
To Next Page
Loading...
Need help?
General
