KE-2050/KE-2060, KE-2050R/2055R/KE-2060R Maintenance Manual
13-18
13-5-4. Setting Up the Network (This setup is performed when communicating with the
HLC)
It is necessary to set up the network to perform the communication between the KE2000-series and
HLC. You must always set up the network to use the HLC in the on-line mode.
<Setting procedures>
Setting up the TCP/IP
Setting up a shared folder
Registering a user
13-5-4-1. Setting Up the TCP/IP
(1) From the Start button, select [Settings], and then [Control Panel].
For Windows NT-----------------------------------------
(2) Double-click the [Network] icon.
Rev. 2.00
To Next Page
Loading...
