Lantronix SLC 8000 User Manual

12: User Authentication
SLC™ 8000 Advanced Console Manager User Guide 239
To set the LDAP bind password:
set ldap set ldap bindpassword
To import or delete a certificate:
set ldap certificate import via <sftp|scp> rootfile <Cert Auth File>
certfile <Certificate File> keyfile <Key File>
host <IP Address or Name> login <User Login> [path <Path to Files>]
set ldap certificate delete
To view LDAP settings:
show ldap
RADIUS
The system administrator can configure the SLC 8000 advanced console manager to use RADIUS
to authenticate users attempting to log in using the Web, Telnet, SSH, or the console port.
Users who are authenticated through RADIUS are granted device port access through the port
permissions on this page.
All RADIUS users are members of a group that has predefined user rights associated with it. You
can add additional user rights that are not defined by the group.
To configure the SLC unit to use RADIUS to authenticate users:
1. Click the User Authentication tab and select RADIUS. The following page displays.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm