Lantronix SLC 8000 User Manual

SLC™ 8000 Advanced Console Manager User Guide 4
Revision History
Date Rev. Comments
March 2014 A Preliminary release.
October 2014 B Initial document for firmware release 7.1.0.0.
June 2015 C Updated for firmware release 7.2.0.0.
Changes include new operating atmosphere information and warning language in
Chinese and Korean. Software changes include additions in Telnet, SSH and TCP
timeout directions, number of sessions message, idle timeout message, VBUS
enabling, assert DTR, run web server, added mounted column information for NFS
Mounts, masked CHAP secret and DOD CHAP secret fields, USB devices in
diagnostics and addition of SSH bit option. SSL settings were removed so the SSLv2
protocol option is no longer available.
June 2016 D Updated for firmware release 7.3.0.0.
January 2017 E Updated power cord information.
June 2017 F Updated for firmware release 7.4.0.0 and for new dual SFP transceiver port or dual
Ethernet port capability options. Updated the following:
 IPv6 Neighbor Table, Ethernet Bonding Status links, and IPv6 Forward Flag under
Network Settings.
 IKE v2, x.509 Certificate, Certificate Authority/Certificate File fore Remote Peer,
Certificate Authority/Certificate File/Key File for Local Peer, SA Lifetime, Remote
and Dead Peer settings under Network VPN.
 Enable v1/v2c, Trap Version, Alarm Delay to SNMP, and Trap User Name,
Password and Passphrase under SNMP Services.
 Added ability change and reset BootCount, BootDelay and BootLimit.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm