Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 380
Description
Displays information about USB buses and the devices connected to them, including the mapping
between a USB device and the SLC port.
Note: For "mapdevice enable", the port names will displayed at the end of the line in
square brackets. To see a list of USB devices with vendor id and product id, use
'treedisplay disable'.
USB Storage Commands
set usb storage dir
Syntax
set usb storage dir <U1|U2>
Description
Views a directory listing of a USB flash drive.
set usb storage fsck
Syntax
set usb storage fsck <U1|U2>
Description
Runs a file system check on a thumb drive (recommended if it does not mount).
set usb storage format
Syntax
set usb storage format <U1|U2> [filesystem <ext2|fat16|fat32>]
Description
Formats a USB flash drive.
set usb storage mount
Syntax
set usb storage mount <U1|U2>
Description
Mounts a USB flash drive in the SLC 8000 advanced console manager for use as a storage
device.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm