Lantronix SLC 8000 User Manual

12: User Authentication
SLC™ 8000 Advanced Console Manager User Guide 254
Figure 12-10 User Authentication > Groups
2. Enter the following:
Group Name Enter a name for the group.
Listen Ports
The ports users are able to monitor using the
connect listen
command.
Data Ports The ports users are able to monitor and interact with using the connect direct
command. U1 and U2 denote the USB upper and lower ports on the front of
the SLC unit.
Clear Port Buffers
The ports whose port buffer users may clear using the
set locallog
clear
command.
Enable for
Dial-back
Select to grant a user. Users with dial-back access can dial into the SLC unit
and enter their login and password. Once the SLC 8000 advanced console
manager authenticates them, the modem hangs up and dials them back.
Disabled by default.
Dial-back Number The phone number the modem dials back on depends on this setting for the
device port. The user is either on a fixed number, or on a number that is
associated with the user’s login (specified here).

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm