Lantronix SLC 8000 User Manual

2: Introduction
SLC™ 8000 Advanced Console Manager User Guide 25
 Local access through a dedicated front panel serial console port
 Web administration (using most browsers)
Protocols Supported
The SLC 8000 advanced console manager supports the TCP/IP network protocol as well as:
 SSH, Telnet, PPP, NFS, and CIFS for connections in and out of the SLC console manager
 SMTP for mail transfer
 DNS for text-to-IP address name resolution
 SNMP for remote monitoring and management
 SCP, FTP and SFTP for file transfers and firmware upgrades
 TFTP for firmware upgrades
 DHCP and BOOTP for IP address assignment
 HTTPS (SSL) for secure browser-based configuration
 NTP for time synchronization
 LDAP, NIS, RADIUS, CHAP, PAP, Kerberos, TACACS+, and SecurID (via RADIUS) for user
authentication
 Callback Control Protocol (CBCP)
 IPsec for VPN access
For brief descriptions of these protocols, see Appendix D: Protocol Glossary on page 393.
Access Control
The system administrator controls access to attached servers or devices by assigning access
rights to up to 128 user profiles. Each user has an assigned ID, password, and access rights.
Other user profile access options may include externally configured authentication methods such
as Radius and LDAP.
Device Port Buffer
The SLC 8000 unit supports real-time data logging for each device port. The port can save the
data log to a file, send an email notification of an issue, or take no action.
You can define the path for logged data on a port-by-port basis, configure file size and number of
files per port for each logging event, and configure the device log to send an email alert message
automatically to the appropriate parties indicating a particular error.
Configuration Options
You may use the backlit front-panel LCD display for initial setup and configuration and to view
current network, console, and date/time settings, and get internal temperature status.
Both a web interface viewed through a standard browser and a command line interface (CLI) are
available for configuring the SLC settings and monitoring performance.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm