Lantronix SLC 8000 User Manual

13: Maintenance
SLC™ 8000 Advanced Console Manager User Guide 301
Banners
The Maintenance > Banners page allows the system administrator to customize text messages
that display to users.
To configure banner settings:
1. Click the Maintenance tab and select Banners option.
Figure 13-15 Maintenance > Banners
2. Enter the following fields.
3. Click Apply to save.
Welcome Banner The text to display on the command line interface before the user logs in. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Welcome to the SLC is the default.
Note: To create more lines use the \n character sequence.
Login Banner The text to display on the command line interface after the user logs in. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Default is blank.
Note: To create more lines, use the \n character sequence.
Logout Banner The text to display on the command line interface after the user logs out. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Default is blank.
Note: To create more lines use, the \n character sequence.
SSH Banner The text to display when a user logs into the SLC via SSH, prior to authentication.
May contain up to 1024 characters. Single quote and double quote characters are
not supported. Blank by default.
Note: To create more lines use the \n character sequence.

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm