Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 351
Description
Displays device port statistics and errors for one or more ports. You can optionally email the
displayed information.
show portcounters zerocounters
Syntax
show portcounters zerocounters <Device Port List or Name>
Description
Zeros the port counters for one or more device ports.
show portstatus
Syntax
show portstatus [deviceport <Device Port List or Name>] [email <Email
Address>]
Description
Displays the modes and states of one or more device port(s). You can optionally email the
displayed information.
Diagnostic Commands
diag arp
Syntax
diag arp|arp6 [email <Email Address>]
Description
Displays the Address Resolution Protocol table (for IPv4) or the Neighbor table (for IPv6) for
mapping IP Addresses to hardware addresses.
diag internals
Syntax
diag internals [email <Email Address>]
Enable debug printing on the next SLC reboot:
diag internals [printapplication <enable|disable>
printconnection <enable|disable>
printmanagement <enable|disable>

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm