Lantronix SLC 8000 User Manual

15: Command Reference
SLC™ 8000 Advanced Console Manager User Guide 338
Parameters
set cli scscommands <enable|disable>
set cli terminallines <disable|Number of Lines>
set cli menu <start|Menu Name>
show cli
Description
Allows you to use SCS-compatible commands as shortcuts for executing commands. It is
disabled by default.
Note: Settings are retained between CLI sessions for local users and users listed in the
remote users list.
set cli menu
Description
If a menu is associated with the current user and the menu was not displayed at login, 'start' will
run the menu. Users with full administrative or menu user rights can also specify the name of any
menu to run.
Syntax
set cli menu <start|Menu Name>
set cli terminallines
set cli terminallines <disable|Number of lines>
Description
Sets the number of lines in the terminal emulation (screen) for paging through text one screenful at
a time, if the SLC 8000 advanced console manager cannot detect the size of the terminal
automatically.
Note: Settings are retained between CLI sessions for local users and users listed in the
remote users list.
show cli
Syntax
show cli
Description
Displays current CLI settings.
show user
Syntax
show user

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm