Lantronix SLC 8000 User Manual

12: User Authentication
SLC™ 8000 Advanced Console Manager User Guide 244
 rights - User rights. The value string is a comma-separated list of two letter user permissions.
Example: "nt,wb,ra".
 data - Data port access. The value string specifies the list of ports the user has 'direct' access
to. Example: "2,4-18,U1,U2".
 listen - Listen port access. The value string specifies the list of ports the user has 'listen'
access to.
 clear - Clear port access. The value string specifies the list of port buffers the user has the
right to clear.
 group - User group. Valid values for the value string are "default", "power", and "admin", and
any SLC custom group name. If a custom group name is specified and it matches a current
SLC custom group name, any rights attribute will be ignored, and the custom group's rights
(permissions) will be used instead. A group name with spaces cannot be specified.
 escseq - Escape sequence. The value string specifies the user's escape sequence. Use "\x"
to specify non-printable characters. For example, "\x1bA" specifies the sequence "ESC-A".
 brkseq - Break sequence. The value string specifies the user's break sequence.
 menu - Custom user menu. The value string specifies the user's custom user menu.
 display - Display custom user menu when a user logs into the CLI. Valid values for the value
string are "yes" and "no".
 dbnumber - Dial-back number. The value string specifies the user's dial-back number for
modem dial-back connections.
 allowdb - Allow a user to have dial-back access. Valid values for the value string are "yes"
and "no".
RADIUS servers will need to be configured to support the Lantronix Vendor-Specific Attribute. For
example, on a FreeRADIUS server, the dictionary will need be updated with the Lantronix
definition by including the contents below in a file named dictionary.lantronix, and including it in the
RADIUS server dictionary definitions by adding the appropriate $INCLUDE directive to the main
dictionary file.
# dictionary.lantronix
#
# Lantronix SLC Console Manager
# Provides SLC-specific user attributes
#
VENDOR Lantronix 244
BEGIN-VENDOR Lantronix
ATTRIBUTE Lantronix-User-Attributes 1 string
END-VENDOR Lantronix
Once this is complete, the users file can be updated to include the Lantronix VSA for any user:
myuser Auth-Type := Local, User-Password == "myuser_pwd"
Reply-Message = "Hello, %u",
Lantronix-User-Attributes = "data 1-4 listen 1-6 clear 1-4
group power"

Lantronix SLC 8000 Specifications

General

Rack mounting	Yes
Console port	RJ-45
Serial ports quantity	48
USB 2.0 ports quantity	2
AC input voltage	120-230 V
Power source type	AC
AC input frequency	50 - 60 Hz

Weight and Dimensions

Weight	5030 g
Dimensions (WxDxH)	436.9 x 304.8 x 43.18 mm