Setup 12-13
12.9 Network Preset
Parameters for transferring are set here. For details of local IP setting, see “Appendix D Wireless
LAN”.
12.9.1 iStorage Preset
You can send exam data or images to the iStorage server and perform analysis using UltraAssist.
For details about this feature, see the UltraAssist manual.
The iStorage screen is as follows:
Name Description
Service Name The name of the iStorage service.
IP Address IP address of the iStorage service device.
Port Port for transmitting.
Connect Click to verify connection.
Add Click to add the Network service to the service list.
Update To save the changed parameters.
Delete Click to delete the selected service from the service list.
Add an iStorage service
1. Set the iStorage server properties as described above.
2. Click [Add] to add the service to the Service list.
Modify a network service
1. Select the service to be updated in the service list.
2. You can see properties in the Configure Service area.
3. Modify the parameters and click [Update] to update the setting.
12.9.2 Network Settings
The Network Settings screen is as follows:
To Next Page
Loading...
Need help?
General
