Image Optimization 5-1
5 Image Optimization
WARNING:
The images displayed in this system are for reference
only. Mindray is not responsible for the correctness of
diagnostic results.
In Dual-B imaging mode, the measurement results of
the merged image may be inaccurate. Therefore, the
results are provided for reference only, not for
confirming diagnoses.
5.1 Imaging Mode
5.1.1 Switching Between Imaging Modes
Switch between imaging modes according to the actual situation. See “2.10 Control Panel” for details.
5.1.2 Image Adjustment
Adjust using the image menu:
For details about menu adjustment, see chapter “3.8.3 Menu Operation.”
Adjust using the touch screen (non-mapping mode)
1. Mode display area (or main functional tabs): displays the current modes. Touch the tab to enter the
mode.
2. Other application mode access: displays the available related application modes. Touch to enter
the modes.
3. Parameter adjusting area: displays the parameters in the current imaging mode or function.
3
1
2
To Next Page
Loading...
Need help?
General
