Maintenance
5-1
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Section 5
Maintenance
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
NOTE: Maintenance is an important preventive measure for maintaining
operating safety and extending the lifetime of the unit. It should not be
neglected under any circumstances.
Risk of Burns
WARNING: Hot! Risk of burns. Wear appropriate protective
clothing/equipment.
Some maintenance work can only be done when the melter is heated up.
Relieving Pressure
WARNING: System and material pressurized. Relieve system of pressure
before disconnecting hoses, guns and hot melt handguns. Failure to
observe can result in serious burns.
Relieve pressure as described in section Installation, Connecting Hose,
Disconnecting.
Important when Using Cleaning Agents
Use only a cleaning agent recommended by the hot melt material
manufacturer. Observe the Material Safety Data Sheet for the cleaning
agent.
Properly dispose of cleaning agent according to local regulations.
To Next Page
Loading...
Need help?
General
