Repair
7-18
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Replacing Safety Valve
WARNING: For safety reasons, the safety valve may not be disassembled.
The complete valve must be replaced every time.
WARNING: Hot! Risk of burns. Wear appropriate protective
clothing/equipment.
Safety Valve
Refer to Installing Service Kit for procedure. However, points 3 and 4 are
omitted.
Safety Valve with Reed Switch
1. Before the safety valve with Reed switch (1) can be detached, the
connecting cable (2) must be unscrewed.
2. Refer to Installing Service Kit for other tasks. However, points 3 and 4
are omitted.
3. Screw the cable onto the new safety valve with Reed switch.
2
1
Fig. 7-28
1 Safety valve with Reed switch 2 Connecting cable
To Next Page
Loading...
Need help?
General
